One of the common questions you may ask is how to dry out a waterlogged surfboard. If you have had your surfboard for many years, you may have noticed that it is not performing as it once did. Cracks may have developed on the underside, and you may believe that it has become waterlogged. There are many things that you can do to test to see if the surfboard has taken on water. If you are looking for a new surfboard for small waves, an older surfer or for a big guy, then read through here,here and here.
One of the easiest ways to determine if it has is to set it on a flat surface, pressed down, and see if any water comes out. A surfboard will not take on any water at all unless it has a gash on the surface. There are ways that you can drain your surfboard, and also repair it, so that you can potentially salvage it before the water logging gets worse.
What Causes Surfboard Waterlogging?
Waterlogging on a surfboard can happen in several different ways. First of all, when you make impact with the surfboard, the crack can allow the water to come in. If you just recently purchased the surfboard, it can cause what is called delamination.
This is where the different components of the surfboard begin to fall apart. If this is not addressed, not only will you have water logging, but the entire surfboard could separate. That’s why it is so important to have this resolved as quickly as you can.
How To Fix A Waterlogged Surfboard
There are steps that you need to take in order to fix this problem. First of all, you need to keep the surfboard out of the water. This will allow the water that can drain to come out. You should also apply pressure to the top, allowing the water which has saturated into the surfboard to come out of the crack.
You will then want to repair the crack, sealing it so that this does not happen again. If there is any part of the surfboard that is sticking out, this needs to be cut away. You will then sand down the area which has been affected so that it is perfectly smooth. This will also make that part of the surfboard rough.
You will then tape off the area around where you are going to be working. You will need to mix up what is called Q-Cell. Once that is done, you will cut the fiberglass, if that is what it is made of, and apply the resin and fiberglass to the surfboard and let it dry.
After a few days, you will then want to sand that area so that it is smooth and matches up with how it was before the incident occurred. After a few more days, the resin will have set properly you can take the surfboard out on the water again.
Is This Something You Should Do Yourself?
You can do this yourself if you want to. It will require you to have all of the materials mentioned and tools that you can use. You will likely need some type of a cutter, sandpaper, or preferably professional grade sanding device. You can get the resin and fiberglass at a local shop that sell surfboard equipment and supplies.
You may also be able to order this for a much lower price by searching on the web. If you are not the type of person that can do repairs on DIY projects, then you should probably take this to a professional. Not only will they have all of the materials and equipment that is necessary, they will have done this several hundred times for others, ensuring that they will do the work properly.
It will likely save you time by taking it to a professional to have this done, and eliminate the potential of all of your time spent being lost because you did not do it properly.
Other Tips You May Want To Use
One final thing to consider is the type of repair resin that you use. Many people do recommend Q Cell above all other similar materials. That is because it is a lightweight filler, one that is very compatible with epoxy resins and polyester. It utilizes inorganic microspheres which are hollow, allowing them to form a very strong bond with a low bulk density.
You will likely be able to find Q Cell for a reasonable price online, but if you need it now, you should purchase this immediately after the incident has occurred so can repair your surfboard before waterlogging causes further damage.
There is a point where the waterlogging will make the surfboard unusable. That is because it will have got inside, slowly expanding the surfboard the point where cutting and sanding will never resolve the issue. However, if it is a small gash, and you can address the problem immediately, fixing your surfboard is certainly possible.
It depends on the type of material that it is made of, how large the gash is, and how soon you can get to the materials and tools that will allow you to fix it.